Acerca de
Singular Photonics:Singular Photonics is a fast-growing fabless semiconductor start-up, developing Single-Photon Avalanche Diode (SPAD) sensors that bring advanced computation directly into imaging
Our sensors enable innovations across LiDAR, fluorescence lifetime imaging (FLIM), spectroscopy and time-resolved optical measurements, powering next-generation solutions for customers worldwide.
Based at Orchard Brae House in Edinburgh, we are a close-knit team at the forefront of the photonics revolution.
About the Role:We are seeking an FPGA Firmware Engineer to join our multidisciplinary R&D team.
This is an FPGA role: you will design, implement and verify the Verilog firmware that powers our SPAD sensors, captures photon timing data at high rates and streams it to the host.
Our sensors generate data faster than most imaging systems ever see, so the interesting problems here are real ones: clock domain crossing, timing closure and getting data off the device without losing a photon.
You will work alongside our hardware, ASIC and software engineers, from architecture through to system bring-up and customer deployment.
You will report to the Lead Firmware Engineer.
Responsabilidades
:Architecture: Define FPGA
Requisitos
and architecture for SPAD sensor readout, in discussion with the hardware, ASIC and software teams.RTL Design: Implement, verify and debug Verilog modules for data acquisition, photon timing, histogramming and sensor control.Verification: Design and run simulations and testbenches, with coverage sufficient to trust the design before it reaches hardware.Synthesis & Timing: Own synthesis, constraints, clock domain crossing and timing closure on AMD-Xilinx FPGA family devices in Vivado.High-Speed Interfaces: Build and integrate the high-speed interfaces that move sensor data: PCIe, USB3, Ethernet, AXI interface, MIPI, LVDS, SLVS, Camera Link.Bring-Up & Debug: Lead firmware bring-up on new boards and sensors, debugging with oscilloscopes, logic ana...